Oxygen Gasoline Cutting Torch kit Big SAVINGS Vs Acetylene propane Cuts 4"

Description

FREE SHIPPING
GOODS ARE
NOT
SHIPPED BY USPS
GOODS ARE SHIPPED BY International Express Air ex our Brisbane Australia Warehouse or our Shenzhen China Factory
.
SUPACUT Oxy-Gasoline Cutting Torch Set. 90% operational SAVINGS Versus Oxy-Acetylene!
Cuts thicker, faster and cheaper than Acetylene or Propane
Cuts up to 4" thick steel. (
or cuts thru 12" with optional 300 model torch
- inquire for details  or see our other SUPACUT listing)
Want MORE POWER... LESS COST ???
STOP PAYING FOR EXPENSIVE ACETYLENE! Tired of paying for rental and refills? Time to switch to an Oxy-Gasoline cutting system. CHEAP to operate
How it works: Gasoline simply takes the place of an industrial gas such as acetylene or propane and cuts CLEANER, FASTER, THICKER and all at MUCH LOWER operating COST.
OPERATING COST
(cutting 1"mm Plate)
GASOLINE
ACETYLENE
PROPANE
Fuel Consumption L\min
0.012
3.5
4.5
Fuel Consumption L\hour
0.72
210
270
Oxygen L/M
23
30
58
mm cut per minute
550
350
500
Fuel
Cost per hour
{{detail_product_description}}.548
.079
.852
Oxygen Cost per hour
.80
.17
.67
Total Per Hour
.347
.252
.520
Meters Cut
16.51
10.51
15.01
Feet Cut
54.16
34.47
49.24
CUTTING COST PER FOOT
{{detail_product_description}}.15
.31
{{detail_product_description}}.56
Cost to cut 100ft =
.41
1.30
.89
GASOLINE
ACETYLENE
PROPANE
OPERATING SAVINGS
75% to 90 %
Basis for Costing Calc's
Gasoline
Per Gallon
.89
Acetylene
145Cu/ft Tank Fill
.00
Propane
Per Gallon
.30
Oxygen
125 Cu/ft Fill
.00
The calculations are based on average figures found 1st May 2021. This is a comparitive guide
only and is in no way intended to be 100% accurate. Please undertake your own cost analysis
based on
your local source of supply for the various products
Cutting capability is also based on "typical" paramaters but will vary depending on product
thickness, condition and type of steel plus the working environment. Performance numbers
are a guide only.
S100 torch cuts from 1/16" - 4" (3mm - 100mm)
PRODUCT INCLUDES:
1 Model 100 Cutting torch
4 Cutting Tips (1/16" - 4" cut)
20 ft of fuel hose
1 0.4Gal (1.5 litre) Explosion-proof gasoline tank  = Approx 3 hours use cutting 1/2" plate
[This tank is designed to be carried with a waist belt and
upside down so outlet valve is at bottom]
Includes instruction manuals, quick start guide and warranty documentation
This starter kit does not include oxygen tank regulator or hose and needs a standard Oxygen tank etc same as oxy-acetylene uses.
PRODUCT DESCRIPTION:
SUPACUT Oxy-Gasoline cutting system utilizes standard compressed oxygen with gasoline as the combustible fuel (instead of acetylene). The fuel storage tank is an explosion proof design and the fuel is stored without pressure, the same as in a FORMULA 1 racing car tank.
Tools are easy and safe to use.
In addition to the standard cutting torch (cuts thru 4") there is a cutting torch that cuts thru 12" thick steel
This listing is for a starter kit with S100 torch, 1 gal gasoline tank and gasoline hose.
Other specialized tools and equipment for automated cutting are sold separately.
OPERATIONAL ADVANTAGES:
Dramatic cost savings: Utilizing gasoline instead of acetylene as the combustible fuel has an outstanding effect on reducing operating costs. When using gasoline fuel costs can be reduced buy up to 90%! Oxygen consumption can be reduced by up to 30% Speed: Cutting speed is often 30% faster than an acetylene based system.
Performance: SUPACUT quickly and easily cuts through steel up to 4" (with the appropriate hand piece and cutting tip can cut to 12").
Versatility: Cutting flame will easily cut across voids (air space between plates). Cuts through paint, dirt, rust and other contaminating surface materials coating old steel.Cleaner smoother cut: This system provides almost 100% oxidation during cutting so leaves an unmatched smooth clean cut finish.
Safer cuts: Utilizing gasoline (as a fuel) greatly improves the cut providing almost 100% oxidation of the cut material leaving no molten steel in the slag.
Multi-layer cutting: Due to the very clean cut and 100% oxidation there is almost no molten steel residue to "stick" cut plates together Why cut one piece when you can cut 5 or 10 at the same time!
Stable flame: Due to the unique patented liquid fuel delivery system the cutting flame is extremely stable. The torch can be used at any angle and even if torch is used upside down or shaken violently the flame shape will not change, even immersed underwater the flame keeps going!
Long Tip life: SUPACUT tips are kept much cooler with the use of a liquid fuel thus dramatically extending tip life.
Robust design: The SUPACUT systems are manufactured with quality materials and will prove to be a durable and reliable system providing many years of service.
Easy-to-use: With the unique regulating control technology of the SUPACUT it is easy to synchronise the control of fuel and oxygen with the regulating valves.
Accurate fuel delivery: Even at only low 75psi (0.5Mpa) oxygen pressure, the hand piece can be used with long hoses and up to 15ft vertical height above the fuel supply tank.
Safety: Amazing as it may seem, Gasoline is actually a safer fuel than acetylene and other flammable gas cutting fuels. Gasoline is non-tempering, non-detonating. The fuel tank is an advanced explosion-proof design so that it can reduce the fuel explosion probability to ZERO. It is impossible to explode even if the fuel tank comes into contact with high temperatures or naked flames. Even if the tank is penetrated the gasoline fuel will not explode.
Patented technology: The Oxy-Gasoline cutting systems is a specialized technology product and has several unique design features protected by patent.
FREQUENTLY ASKED QUESTIONS:
Q. Does the product do all that oxy-acetylene cutting torch does?
A. YES ...and MORE.  The SUPACUT Oxy-gasoline system was originally designed as a VERY powerful cutting system and that is its primary strength. The starter set includes the explosion proof tank, fuel hose cutting torch and tips to cut up to 4" thick steel.
However if you want to heat, weld (or braze) there are also optional a heating torch and a welding torch available. If you need to cut or heat, oxy-gasoline is the way to go, as it has much higher performance and the running cost is a fraction of acetylene! If welding is your primary need, yes you can weld with the optional welding torch, however due to the greater oxidizing nature of the oxy-gasoline flame steel welding is more challenging than with an acetylene setup and its extra power limits its suitability for lighter materials.
Q. Can I heat and bend steel?
A. YES, The cutting torch can also be used for heating work, but if heating is the primary need the optional dedicated heating torch performs better.
Q. Can I braze with this system?
A. MAYBE.....Depending on the job, the heating or welding torch can be used for heating pieces to braze large heavy gauge material. Not suitable for very light gauge work, it just has too much power!
Q. Where can I purchase the oxy-gasoline fuel ?
A. Oxy-gasoline is not a single product. The
gasoline required is just regular gasoline
you buy for your motor vehicle, same place you get fuel for your car or pickup. Kit comes with a specially designed explosion proof 4 liter tank and hose to connect to the torch. Oxygen requirement is same as oxygen for oxy-acetylene. You usually rent or buy a cylinder from a local industrial gas supplier.
Q. Why do you say the oxy-gasoline system is more powerful than oxy-acetylene?
A. Due to the properties of gasoline the gas vapor is about 4 times as heavy (dense) as oxy-acetylene so has much more "punch"
Q. If I need to cut a hole in a piece of steel can I cut through plate or other solid surface or do I have to drill a hole first?
A. No pre drilling is needed. The SUPACUT is MUCH better at punching through metal than an acetylene system. As the vapor is approximately 4 times heavier/more dense than acetylene and the flame is almost 100% oxidizing, SUPACUT can easily cut a hole and has minimal heavy/hot waste (acetylene has about 30% molten steel waste).
Q. Do I need oxygen?
A. YES. Oxygen is needed for the torch to function so a standard oxygen setup is required just the same as for an acetylene system. However, the SUPACUT uses about 30% less oxygen than an acetylene system.
Q. Can I use compressed air instead of oxygen?
A. NO. This will not work with compressed air. Like acetylene system you MUST have OXYGEN to achieve the temperatures required for operation
Q. Does the gasoline tank need to be pressurized
A.  NO - the torch is designed in such a manner the flow of oxygen thru the torch draws the gasoline into the tip, then mixes the gasoline and oxygen and the resultant vapor is burnt to provide the cutting flame
Q. How much gasoline does the system use?
A. Gasoline consumption is TINY. As a simple example if you were cutting 1/2" plate with a C100 torch (with a No. 1 tip), in one hour you should be able to cut about 100 ft of plate and use less than 1/4 Gal gasoline (approx. {{detail_product_description}}.75c gasoline cost) (See chart in pictures).
OPTIONAL ITEMS
(please email us for availability):
S300 cutting torch (great for cutting up scrap steel!) 26 &1/2" (675mm) long and cuts up to 12" (300mm)
Welding torch
Heating/brazing torch
Machine mountable torches for automated cutting equipment
Small 1/4 Gal explosion proof gasoline tank.
Large 2.5 Gal explosion proof gasoline tank.
Backpack kit. Designed for ultra portability as required in Police/Fire and other emergency services. Includes backpack, 1/4 gal tank cutting torch.
WARRANTY
12 month back-to-base replacement warranty against failure or faulty manufacture. Normal misuse/abuse exceptions apply.
SHIPPING:
DUE TO INTERNATIONAL ORIGIN GOODS ARE
NOT
SHIPPED BY USPS
GOODS ARE SHIPPED BY
International
Express Air ex our Brisbane Australia Warehouse or our Shenzhen China Factory
.
NOTE   International Express Couriers
absolutely require a phone number
for customer at destination.  When you order
please put your phone number
in your comments
otherwise we cannot dispatch your order.
I
nternational buyers please also note that due to the many differing rules and regulations in various countries it is impossible for us to know and therefore allow for any local charges that you may incur other than the FREE international express shipping included in your order for delivery to your country. Therefore any "local" fees and charges in your country of destination are your responsibility.  Additionally your border controls may created unexpected delays.  Please be patient.  It is worth the wait.
Feel free to ask any questions using the question box at the bottom of this advert. You can also contact us by email
NOTE:
Pictures show various torch models in use and are not necessarily indicative of the S100 torch and starter kit for sale in this listing.
Advertising content protected by Copyright. DAVCO PTY  (Davco.biz)